If you have a septic tank, you may have a love / hate relationship with that tank. Most of the time it saves you money, because you don’t have to pay for water reclamation services regularly. It can be an expensive and complicated job though, when something goes wrong. People with septic tanks need to ensure they maintain their tanks properly, and with these basic tips, they can do so.Do you want to learn more? Visit Blue Diamond ET60
When you need to pump the tank, you need to regularly pump your septic tank. The regularity of pumping depends on tank size and residential size. Experts recommend a typical home should be pumped every three to five years with a 1,000-gallon tank. If your tank is smaller you need to pump it more frequently. Pumping the tank removes the solid build-up which is an inevitable part of the septic cycle.
Another method to increase the duration between septic tank pumpings is by increasing the amount of solid waste that is consumed in the environment by the bacteria. You can do this by installing a septic system in your home that is Fixed Activated Sludge Treatment (FAST). FAST systems provide the ideal environment for the bacteria used to decompose much of the solid waste that you are bringing into the network. FAST systems house these bacteria in an underground, aerated, self-cleaning chamber of the reactor that enables optimal growth of the bacteria. This innovative method results in a 90-95 per cent elimination from waste water of gross suspended solids.
Too much water and too little water sent through a septic tank will cause problems. To maintain the tank running efficiently, keep the flow of water as equilibrated as necessary. Too much water will bring more water through the device than it was designed to accommodate, such as what you can push through the machine if you are doing substantial washing. This means it could flood the system. In addition, too much water flow can push some of the solids that have settled into the leaching field at the bottom of the tank, causing clogs and damage to the environment. Times of low water use can cause bacteria to die in the system.
It is not always possible to keep the water flow level. There will be times when you need to use more water, and other times, like when you’re out of town, you won’t use as much water as that. FLASH systems ‘ unique design allows them capable of processing a varying volume of water.
Avoiding Nitrogen Contamination The process inside the septic tanks produces as a byproduct nitrogen. In groundwater too much nitrogen leads to contamination that is when it reaches human drinking water. That means your septic tank could be a very real danger to the environment.
The septic tank bacteria work to neutralize much of that nitrogen. For that cause, you need to make sure the bacteria work properly. Avoid sending large quantities of household cleaners and other potent chemicals down the drain, as these can destroy some of the bacteria in the atmosphere, allowing more nitrogen to build up and leach into the water. It is not possible to avoid completely sending those products down the drain, but to avoid excessive use. Also, avoid using powdered septic detergents.
If you have a FAST system, nitrogen buildup doesn’t need to be as important to you. The FAST system involves multiple processes, including bio-chemical, physical and biological processes, when treating wastewater. As a result, nitrogen levels in the water that are sent to the leach field are greatly reduced by the system.