Moisture and Mold Remediation: A Symbiotic Relationship

A lot of people on the Gulf Coast learn about mold remediation. Floods have long been a part of life in and near coastal low-lying cities such as New Orleans and Houston. But raising flood rates in more coastal cities become an extremely common fact than ever before. Furthermore, interior states like Texas, Oklahoma and Kansas have all been inundated by recent temperature extremes around the world. Heat-too much, or too little-has been a concern in most of the world today.Click here to find more about The CleanUP Guys are here.

There is mold everywhere, everywhere there is rain. Invisible hordes of the spores-reproductive “seeds”-travel all over the world, but they will germinate just when they find moisture. Mold and moisture have a symbiotic relationship: the former depends entirely on the latter for development. Moisture is water vapor that is borne through the breeze. Therefore, whenever the air becomes damp, surfaces appear to be damp and, particularly when floods have soaked residences ‘ dry, dark inner walls, homeowners are far more likely to require mold remediation.

Such symbiotic interaction is the explanation why elimination is not adequate to put down an infestation. If the moisture is eliminated, these mischievous mushrooms would most certainly only grow up, because it is categorically difficult to hold billions of spores outside at bay. At the other hand, mold remediation will effectively slow down and/or even remove development within homes and other buildings. Successful remediation methods also operate under the same science principle: not only will it be eliminated from noticeable and concealed areas, but also regulate the indoor moisture necessary for its growth, in order to suppress the indoor mold.

The optimum moisture level in indoor home air is between 30% and 50%; moisture rates higher than 50% are far more favorable to production. A inexpensive, portable humidity meter, or moisture meter, reads and rating the amount of water vapor that is stored in the air. Another typical symptom signaling high humidity in households is constant “sweat” on indoor walls, windows, or pipes. Indoor condensation may result from usage of the bath or appliance (e.g., baths, dishwasher, dryers), which absorbs moisture. Those rooms would also also be ventilated to the outside. A behavior well worth creating is the rapid drying up of household condensation, indoor spills and other surface moisture. Usually, fully dry indoor areas within 24-48 hours of getting damp won’t attract mold.